Stump Grinding & Removal in Jackson, MS

Jackson Tree Pros grinds stumps below grade anywhere in the Jackson, Mississippi metro, including stumps left behind by another company. Most residential stump grinding runs $100 to $400 per stump, priced by diameter, and takes under an hour on a typical yard stump. We grind 6 to 12 inches below the surface so the area can be resodded or replanted. Call (601) 821-1986 for a free estimate.

How much does stump grinding cost in Jackson, MS?

Stump grinding in the Jackson area typically costs $100 to $400 per stump, priced by the diameter measured at ground level. A small 12-inch stump sits near the bottom of that range. A 40-inch oak stump with a wide root flare sits at the top, or above it.

Four things move the price. Diameter is the main driver, since grinding time scales with the volume of wood. Access matters, because a stump behind a locked gate narrower than the grinder means either a smaller machine or hand work. Root flare adds cost on old hardwoods, where the surface roots spreading out from the base have to be ground too. Rocky or debris-filled soil dulls the teeth and slows the job.

Grinding several stumps on one visit is far cheaper per stump than separate trips, because the trailer, the machine, and the drive time are already paid for. If you have three stumps in the yard, do them together.

What is the difference between stump grinding and stump removal?

Stump grinding chews the stump into chips down to 6 to 12 inches below grade and leaves the root system in the ground to decay naturally. Full stump removal excavates the entire root plate with heavy equipment, which leaves a large crater and typically costs three to four times as much.

Grinding is the right answer for nearly every residential situation. It is faster, cheaper, and far less destructive to the surrounding lawn and irrigation. Once the stump is ground and the hole is backfilled, you can lay sod or seed over it.

Full excavation is only worth it in specific cases: when a foundation, slab, driveway, or pool is going in over the exact spot, or when the root mass genuinely has to be gone rather than just below grade. If you are building over it, tell us during the estimate and we will scope it correctly.

How deep do you grind a stump?

We grind to 6 to 12 inches below the surrounding grade as standard, which is deep enough to plant grass, lay sod, or install a bed over the spot. Deeper grinding is possible where the plan calls for it, for example if a new tree is going in the same location, which generally wants 18 inches or more of clear ground.

Tell us during the estimate what the area is becoming. Sod, a flower bed, a fence post, a patio, and a replacement tree each want a different depth and a different backfill approach, and it costs nothing to plan it correctly the first time.

What happens to the wood chips and the hole?

Grinding produces a surprisingly large pile of chips, usually far more volume than the stump appeared to hold, and you have three options for it. Standard practice is to backfill the hole with the grindings, mound the surface slightly to allow for settling, and rake it smooth.

The three choices: leave the grindings as backfill at no extra cost, which is the default and works fine for lawn areas; have us haul the grindings off and backfill with topsoil, which is what you want if you are planting immediately; or keep the pile for use as mulch elsewhere on the property.

One thing to know if you are planting into the spot: fresh wood chips temporarily tie up nitrogen in the soil as they break down, which stunts new grass and young plants. If a new tree or a new bed is going in the same location, haul the grindings and bring in topsoil. If it is just lawn, backfilling with grindings is fine, and expect to top off the settling once or twice over the first year.

Why should you grind a stump instead of leaving it?

A left stump is not neutral, it actively creates problems on a Mississippi property. Decaying stumps and their root systems are a preferred habitat for subterranean termites, which are aggressive throughout central Mississippi, and putting a rotting food source thirty feet from your foundation is not a good plan.

The rest of the case is practical:

• Stumps are a genuine trip hazard and a mower-deck killer
• Many hardwoods and most sweetgums send up persistent root sprouts for years unless the stump is ground
• Decaying stumps host carpenter ants, roaches, and fungal growth close to the house
• A stump blocks any use of that footprint: no replanting, no bed, no fence line, no patio
• Visible stumps read as deferred maintenance to buyers and appraisers

What areas do you serve for stump grinding & removal?

We provide stump grinding & removal in Jackson and across the metro in Hinds, Rankin, and Madison counties, including Clinton, Brandon, Madison, Ridgeland, Pearl, Flowood, Byram, Gluckstadt, Canton, Raymond, Florence, Richland, Terry. See all service areas.

What other tree services do you offer?

We are a full-service crew, and most customers combine two or three services on one visit because it costs less than separate trips.

• Tree Removal: Safe removal of dead, dying, hazardous, or unwanted trees of any size.
• Tree Trimming & Pruning: Crown thinning, deadwood removal, and clearance pruning to keep trees healthy.
• Emergency Tree Service: Storm-downed and leaning trees cleared fast across the metro.
• Storm Damage Cleanup: Full debris cleanup and hauling after Mississippi storms and high winds.
• Land & Lot Clearing: Brush, undergrowth, and tree clearing for lots, fence lines, and new builds.

Related guides

• How much does tree removal cost in Jackson, MS?
• All tree service questions, answered